Published: 20/5/2022 | Views: 418
In this article, we shall be walking you through the basic structure and function of the glass bottle filling machine. So, read on and have all your concerns explained in simple terms.
The picture above shows a liquid filling machine, sometimes called a bottle filler. The use of this machine is of great importance to different industries. Most especially industries that deal in food and beverages, where they fill containers with their products.
The bottle filler is more efficient than the use of manual machine, it fills the containers faster, smoothly and it reduces waste to the barest minimum.
In this article, we shall be walking you through the basic structure and function of the glass bottle filling machine. So, read on and have all your concerns explained in simple terms.
The bottle filling machine has three fundamental components, which includes the storage tank, the filling host, and the frequency conversion speed control module.
Below are more knowledge about each part.
The machine's storage tank is a distinctive air tank that has a level sensor to mark the fluid level. The upper part of the tank includes a feed solenoid valve.
The fluid from the past operation flows into the tank through the valve.
Once the fluid level sensor detects that fluid has reached the marked, it gives a hint to close or stop the supply.
If the material marked level drops to a specified level, the solenoid valve for the supply opens instantly for the supply.
A send out terminal is available at the lower part of the tank. Which is connected to the pressure tube of the loading host through a conduit pipe.
The fluid in the storage tank is injected into the piston cylinder by the host, and it fills the bottle through the nozzle.
The cycle for the loading activity is completed by the main device at the liquid loading main unit.
The main unit has numerous filling head. And cylinders for injecting the fluid are available at both sides. Each loading head has its own attached cylinder.
The liquid in the storage tank gets pumped into the cylinder. Then pressed out, and put into the appropriate bottle via the filling head.
On the loading head, a small cylinder moves a small piston that opens. And closes the loading head's nozzle, working as a tap.
Put the nozzle into the bottle when the loading is about to begin. Open the small piston at a specified distance from the bottom of the bottle to begin loading.
While loading, the loading head moves up until the loading is complete. Then, the spray nozzle seals off and upraises to the bottle mouth point.
Two stop rods get activated by air cylinders on both sides of the loading table. They can attain precise loading with the capping device on the loading table.
The occurrence converter regulates the conveyor motor. This permits for changing of speed and expense-efficient operation.
The inlet cylinder drawback when the motor turns on. The unfilled bottles are moved in from the conveyor belt, and the bottle begins to enter.
The outlet cylinder enlarge when the motor turns off. The transmitted unfilled bottle gets interrupted the outlet stop rod.
To count the total bottles, a photoelectric switch gets mounted at the bottle inlet.
When the amount of bottles supplied equals that of the filling heads. The inlet cylinder enlarge to block the inlet, the conveyor motor seizes, and the transmission of bottles stop.
I am sure, you now know the fundamental workings of a glass bottle filling machine.
Do you have a need to step up your production process using the state of the art glass bottle filling machine? If yes, then you are at the right place.
We are a dependable brand you can count on in the design, manufacture and supply of premium glass bottle filling machine.
For more information about our products and services, kindly click here to contact us.
Here is a selection of Datong machines that are related to this news article.
Fill out the form below and our sales will contact you for a consultation.
